Please Note: Website inventory is held off-site, if you'd like to confirm instore availability please contact us.
Description
DENALI DRL Daytime Running Lights With Waterproof Flush Mounting Kit - Amber
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI DRLs integrate perfectly with the front end and are unbelievably bright. Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with the motorcycle's original high beam switch. A waterproof connector and posi-tap pigtail utilize power from your vehicles running light circut, making installation a breeze and operation effortless; the DRLs will simply come on and turn off with your vehicle's ignition.
Like emergency strobe lights, the DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also provide a noticeable spread of light immediately in front of your motorcycle at night. Available in white and amber.
Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0 -series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
Features:
- Dual Circuit: 50% & 100% intensity
- 180° viewing angle
- 6 Extremely bright LEDs
- Very efficient 6-watt (each) power consumption
- Size: 4.5in H x 1.0in W x 0.3in D
- Low profile design
- Waterproof mounting gasket
What's in the box:
- (1x) DENALI DRL Pods
- (1x) Waterproof gasket
- (1x) Set of flush-mount nut and bolt hardware
- (1x) Set of flush-mount self tapping screw hardware
- (1x) Wiring pigtail
- (1x) Wiring adapters for DENALI CANsmart or 2.0-series lighting harness
- (3x) Posi-taps
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest, slimmest housing possible, the DENALI DRLs integrate perfectly with the front end and are unbelievably bright. Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with the motorcycle's original high beam switch. A waterproof connector and posi-tap pigtail utilize power from your vehicles running light circut, making installation a breeze and operation effortless; the DRLs will simply come on and turn off with your vehicle's ignition.
Like emergency strobe lights, the DENALI DRL optics are designed to concentrate the light at the source as opposed to project it down the road. While ideal for daytime and nighttime conspicuity, these lights will also provide a noticeable spread of light immediately in front of your motorcycle at night. Available in white and amber.
Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart Accessory Controller or to any DENALI 2.0 -series wiring harness. When connected to a DENALI 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
Features:
- Dual Circuit: 50% & 100% intensity
- 180° viewing angle
- 6 Extremely bright LEDs
- Very efficient 6-watt (each) power consumption
- Size: 4.5in H x 1.0in W x 0.3in D
- Low profile design
- Waterproof mounting gasket
What's in the box:
- (1x) DENALI DRL Pods
- (1x) Waterproof gasket
- (1x) Set of flush-mount nut and bolt hardware
- (1x) Set of flush-mount self tapping screw hardware
- (1x) Wiring pigtail
- (1x) Wiring adapters for DENALI CANsmart or 2.0-series lighting harness
- (3x) Posi-taps
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.